U-Line 3024DWR, Руководство пользователя и сервисное руководство

Страница: 25 / 68

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Control Operation 3
USER GUIDE
u-line.com
Beverage/Drinks 4 Hours
Market/Fresh 4 Hours
Root 1 Hour
Pantry 4 Hours
Deli 5 Hours
To initiate quick chill:
1. Press to select the desired zone, left
or right.
2. Press to select the desired mode
setting.
3. Press until the temperature set point reads
“Quick”.
The quick chill feature will then begin for the period
of time dictated by the mode type. To cancel quick
chill, simply select a set point other then “quick”.
NOTE: There may be a delay before quick chill is
activated. If the opposite zone is currently in a
cooling cycle while quick chill is selected, the cooling
cycle on the opposite zone will first be completed.
NOTE: Please note, that when quick chill is activated,
the zone opposite the active quick chill zone will not
return to a cooling cycle until quick chill is complete.
If storing product in the opposite zone it is important
to limit the number of times the door is opened in the
zone not currently under quick chill.
INTERIOR LIGHTING
Your U-Line 3000 Series unit uses a state of the art
LED lighting system.
Up Zone Toggle
Down U-Select Lighting
1. To begin, press to enter the lighting menu.
2. The unit initially defaults to control the lighting in
both zones simultaneously. To select a single zone
press
. Notice the arrows on top of the display
changing state. Pressing once will select the left
side zone, pressing it again will select the right
side zone, pressing it a third time will select both
zones.
3. Press to cycle through each available
brightness setting (Low, Medium or High).
4. Press to cycle through each available timer
setting. Selections include “On With Door”, “On 3
Hours”, “On 6 Hours”, or “On 24 Hours”.
5. To exit, press or simply wait for the menu to
time out.
ERROR NOTIFICATION
The 3000 model series continuously monitors a series
of inputs and parameters to ensure proper and
efficient operation of your unit. Should the system
detect a fault, an error notification will be displayed
on the user interface. See below for a list of errors.
NOTE: Singe zone models will not use (L) left or (R)
right zone indicators in error notification.
ID Description Solution
or