u-blox EVK-R6, Руководство пользователя

Страница: 19 / 27

EVK-R6 and EVK-L6 - User guide
UBX-21035387 - R03 Appendix Page 19 of 27
C1-Public
3. In AT terminal, enter the following AT commands to set the PDP_type and the APN .
Command sent by DTE (user) DCE response (module) Description
AT+CFUN=4 OK
Set the module in airplane mode. The module will
deregister from the network and both RF Tx and RF Rx
will be disabled.
AT+CGDCONT=1,"IP","ibox.tim
.it" OK
Define a PDP context with preferred APN: in this
example, the “ibox.tim.it” APN is selected.
AT+CFUN=1 OK Set the module to full functionality. The module starts
the automatic network registration.
AT+CPIN? +CPIN: READY
OK Check the SIM PIN status and act accordingly.
AT+COPS? +COPS: 0,0,"I TIM",7
OK Check the +COPS <AcT> parameter to see if the
module is registered to the network.