EVK-R6 and EVK-L6 - User guide
UBX-21035387 - R03
Appendix
Page 16 of 27
C1-Public
6.
Now the new modem is visible in
Control
Panel
, under
Phone and Modem
>
Modems
.
Any extra initialization AT command (e.g.,
to set a specific APN name) can be entered
by selecting
Properties
and filling in
Advanced
>
Extra initialization commands
text box.
Now the module is ready, and the connection can be configured.
The modem configuration can also be edited in
Device Manager
, by clicking on the modem name.
B.2
Install and configure a high data rate modem connection on
Windows
This example describes how to install and configure a high data rate packet data connection on a PC
with the Windows 10 operating system, using the TCP/IP stack of the PC, over the native USB
interface of the cellular module connected to the Windows PC by the Cellular Native USB connector
(J105 on the ADP-R6 / ADP-L6).
1.
From
Control Panel
, select
Network and
Sharing Center
>
Set up a new connection
or network
”.
2.
Click
Connect to the Internet
and then
Next
.
