Tysso PRP-350, Инструкция по эксплуатации

Страница: 49 / 59

- 45 -
4. Power Adaptor Replacement
In general, the embedded power adaptor is pre-installed in
the printer unit for use.
To remove the power adaptor:
1.
Turn off the power of the printer.
2. Disconnect the power cord.
If necessary, disconnect the printer cable.
3. Open the printer cover and remove the paper roll.
Store the paper roll to a secure location.
Place the printer on a flat, clean and stable location (desk,
table…etc.).
Note:
To prevent injuries to the printer, carefully turn over the
printer and put on a flat, clean and stable surface with
additional cushioned material (for example: blanket).