TYROLIT Hydrostress SK-SD, Инструкция по эксплуатации и запасные части

Страница: 23 / 66

Operating Instructions Safety instructions
SK-SD / 007 2-3
2.3 General safety rules
2.3.1 Statutory provisions
The generally applicable national and local safety and accident prevention
provisions and the supplementary operator regulations must be followed
and complied with.
2.3.2 Inspection and maintenance obligation
The operator is under an obligation to only use the wire saw SK-SD when
it is in a perfect and undamaged condition. The maintenance intervals list-
ed in the Operating Instructions must be adhered to without fail. Malfunc-
tions and mechanical damage must be rectified without delay.
2.3.3 Spare parts
Only original spare parts should be used. Otherwise damage may be
caused to the wire saw SK-SD or to other property and persons.
2.3.4 Power connections
The wire saw SK-SD must be connected and coupled to the drive unit used
in accordance with the Operating Instructions.
2.3.5 Modifications
No technical alterations should be made to the apparatus in the form of ad-
ditions or conversions without the written consent of TYROLIT
Hydrostress AG.
2.3.6 Safety instructions in the individual chapters
The chapters of these Operating Instructions contain additional safety in-
structions. These make reference to specific potential dangers (residual
dangers). The instructions must be followed closely and require that the ac-
tions described are taken.