TYROLIT Hydrostress SK-SD Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 66

background image

Operating Instructions

Safety instructions

SK-SD / 007

2-1

2

Safety instructions

2.1

General

2.1.1

Target audience

This chapter describes the safety instructions that are essential to follow
when using the wire saw SK-SD.

All persons who work on and with the wire saw SK-SD have a duty to read
and understand the chapters of the Operating Instructions relevant to their
particular activities and the Diamond wire saws Safety Manual /System De-
scription.

This applies in particular to the "Safety instructions" chapter which is man-
datory for all persons and activities.

2.1.2

Observance of the safety instructions

No work must be performed on or with the wire saw SK-SD before the safe-
ty instructions contained in the Operating Instructions (Chapter 2) have
been read and understood. The Operating Instructions are mandatory for
all work – abridged instructions should only be used in the form of check-
lists.

The wire saw SK-SD has been inspected before being shipped and is de-
livered in perfect condition. TYROLIT Hydrostress AG does not accept any
liability for damage which is caused by failure to observe the instructions
and information provided in the Operating Instructions. This applies in par-
ticular to:

• Damage caused by improper use and operator error.

• Damage caused by failure to observe safety-related information in the

Operating Instructions and the Diamond wire saws Safety Manual / Sys-
tem Description or shown on the warning signs fitted to the machine.

• Damage caused by defective or neglected maintenance work.

Independently performed conversions and alterations may affect safety
and are not permitted.

2.1.3

Use for intended application

The intended application is described in "Chapter 1" under 1.1.2,

1-2.

Information

The safety instructions for the wire saw SK-SD are supplemented by the
safety instructions of the “Diamond wire saws Safety Manual /System
Description”.
No work should be performed on or with the wire saw system until the
safety instructions in the wire saw Operating Instructions and the Safety
Manual / System Description have been read and understood.

«
...
19
20
21
22
23
...
»

Содержание SK-SD



































































Отзывы:

Нет отзывов

Похожие инструкции для SK-SD

Бренд: Mainca Страницы: 29

Бренд: Far Tools Страницы: 58

Бренд: Clarke Страницы: 16

Бренд: Ryobi Страницы: 16

Бренд: DoAll Страницы: 37

Бренд: Texas Страницы: 38

Бренд: Tradesman Страницы: 26

job FLEXICUT 1140E

Бренд: Femi Страницы: 116

Бренд: baalbaki Страницы: 2

Бренд: General International Страницы: 23

Бренд: Ryobi Страницы: 84

Бренд: Hitachi Страницы: 62

Бренд: Hitachi Страницы: 69

Бренд: Hitachi Страницы: 64

Бренд: Hitachi Страницы: 80

Бренд: Hitachi Страницы: 68

Бренд: Hitachi Страницы: 36

Бренд: AEG Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды