2 Safety
EN Floor grinding machine FGE 450
5
All laws and regulations (e.g. the valid regulations on
waste disposal), accident prevention guidelines and
generally recognised safety rules must be complied
with when working on and with the machine.
2.2 Safety instructions
This machine incorporates state of the art technology
and has been built in accordance with recognised
safety regulations. This ensures that the highest possi
ble standards of occupational safety are maintained.
However, incorrect use of the machine could endanger
the health and lives of the personnel or cause material
damage.
The machine may only be operated by people who
have been assigned to do so and who have the ap
propriate training and skills.
If any defects are found in the machine that
could endanger people or damage property,
stop the machine immediately and ensure that it
cannot be used again until all repairs are com
pleted.
The operating and maintenance personnel resp
onsible for the machine must ensure that no one
can enter the machine's danger zone during
operation or maintenance work.
Persons with pacemakers are not permitted to
work with the machine!
Risk of injury if safety equipment has been
removed or is non-functional!
The safety equipment must be checked for com
pleteness and function before starting up.
The safety equipment must be mounted during
operation.
The surfaces to be processed by the machine
must be free of obstacles.
Warning signs [
!
Fig. E/H] must be in a legible
condition!
Risk of injury from rotating machine parts!
Limbs and clothing can be drawn in.
Proceed with the greatest care and caution!
When working on the machine (set-up, mainte
nance, service, repair, cleaning, etc.), the power
supply of the machine has to be disconnected
from the mains
(disconnect power plug)!
High-voltage electrical current can be fatal!
Only connect the machine to power supplies
equipped with a ground fault circuit breaker
(type B)!.
Connections with mains cables
must be protected from splash water!
Only suitably knowledgeable, qualified profes
sional electricians may perform work on any
electrical parts of the system.
Risk of poisoning due to harmful substances at
the workplace!
Eating, drinking and smoking at the workplace is
not permitted. Always eat in break rooms or
canteen areas!
After completing the work, thoroughly clean
yourself!
A general inspection of the machine must be
conducted before starting up the machine. Parti
cular attention should be paid to damaged or
loose components, and wear.
The machine may only be put into operation in
perfect technical condition.
Adding to or modifying the machine in any way
that could compromise operating safety is prohi
bited!