TYROLIT Hydrostress HRE400 Скачать руководство пользователя страница 4

Страница: 4 / 32

TYROLIT

Hydrostress AG

Page 4

Ring saw HRE400



Concerning these instructions

These instructions are a part of the electrical tool. They describe how to use the equipment

safely and properly in all phases of operation.

• Read the instructions carefully before use, particularly the safety instructions.

• Keep the instructions for the entire service life of the electrical tool.

• Ensure that the instructions are available to the operator and the service engineers at all

times.

• Pass the instructions on to all subsequent owners or users of the electrical tool.

• Update instructions with all supplements received from the manufacturer.

Danger symbols in these instructions

DANGER

Warning of danger, where failure to comply could lead to death or serious injury.

WARNING

Warning of danger, where failure to comply could lead to injuries or damage to property.

WARNING

Warning - dangerous electrical voltage.

Before working in an area identified in this way, ensure the installation or electrical tool is fully

isolated from the power (voltage) and secured to prevent it being accidentally powered up

again.

INFORMATION

Information for optimum use of electrical tool. Failure to take note of this information may

mean it is not possible to guarantee the performance stated in the technical data.

RECYCLING

Take waste for recycling.

DISPOSAL

Observer country-specific national and regional laws and guidelines when disposing of the

electrical tool.

1.1

Содержание HRE400

































Результаты поиска

Содержание HRE400

Отзывы:

Похожие инструкции для HRE400

Бренды по названию

Популярные бренды

TYROLIT Hydrostress HRE400, Руководство по эксплуатации

Результаты поиска

Содержание HRE400

Отзывы:

Похожие инструкции для HRE400

Бренды по названию

Популярные бренды