TYROLIT
Hydrostress AG
Page 11
Ring saw HRE400
Personal protective clothing
It is mandatory for anyone working with and on the electrical tool to wear personal protective
equipment.
Personal protective clothing
Residual risks
There is a risk of serious injuries from residual risks described in the chapters that follow.
Sharp edges
Risk of serious lacerations if contact is made with the cutting tool.
X
Do not touch the tool during operation.
X
Always wear gloves when handling the stationary tool.
Diamond segments flying off
X
Before use, always ensure that the ring guard is correctly fitted and undamaged.
X
Do not start sawing if anybody else is in the danger zone.
X
Ensure a safe distance of 15 m to the electrical tool is maintained.
X
Replace the disk grinding ring if diamond segments start to break off.
Kick-back
Incorrectly positioning the disk grinding ring or cutting the wrong materials can cause the
electrical tool to kick-back and seriously injure the operator.
X
Cut only approved materials for which the tool was designed and intended.
X
Do not apply disk grinding ring above the centre to a corner of a workpiece.
Unintentional start-up
X
Before starting up, ensure that:
–
The control handle with lockout is working correctly.
–
Nobody else is in the danger zone.
Vibration
Vibration can cause circulation problems and/or nerve damage.
Consult a doctor in the event any symptoms become evident.
2.8
2.9
2.9.1
2.9.2
2.9.3
2.9.4
2.9.5
