TYROLIT Hydrostress HBE 350, Руководство по эксплуатации

Страница: 5 / 24

n
0
………......Rated speed
min
-1
….........revolutions or reciprocation per minute ........Wear safety shoes
.........Protective earth
............Warning of general danger
........Wear a helmet, goggles and hearing protection
........ Work Clothes
........Read the instructions
........Before working on the equipment unplug mains
.........DANGER! Keep hands away from cutting area and the blade.
........Wear gloves
........Wear a breathing mask
........do not dispose of electric tools, accessories and packaging together
with household waste material
SAFETY INSTRUCTIONS FOR CUTTING-OFF OPERATIONS
Cut-off machine safety warnings
a. The guard provided with the tool must be securely attached to the power tool and
positioned for maximum safety, so the least amount of wheel is exposed towards the
operator. Position yourself and bystanders away from the plane of the rotating wheel.
The
guard helps to protect operator from broken wheel fragments and accidental contact with wheel.
b. Use only diamond cut off wheels for your power tool. Just because an accessory can be attached to
your power tool, it does not assure safe operation.
c. The rated speed of the accessory must be at least equal to the maximum speed marked on
the power tool.
Accessories running faster than their rated speed can break and fly apart.
d. Wheels must be used only for recommended applications. For example: do not grind with the side
of a cut-off wheel.
Abrasive cut-off wheels are intended for peripheral grinding, side forces applied to
these wheels may cause them to shatter.
e. Always use undamaged wheel flanges that are of correct diameter for your selected wheel.
Proper
wheel flanges support the wheel thus reducing the possibility of wheel breakage.
f. The outside diameter and the thickness of your accessory must be within the capacity rating
of your power tool.
Incorrectly sized accessories cannot be adequately guarded or controlled.
g. The arbor size of wheels and flanges must properly fit the spindle of the power tool. Wheels
and flanges with arbor holes that do not match the mounting hardware of the power tool will run
out of balance, vibrate excessively and may cause loss of control.
h. Do not use damaged wheels. Before each use, inspect the wheels for chips and cracks. If
5