TYROLIT Hydrostress AGE125, Руководство по эксплуатации

Страница: 24 / 178

TYROLIT
24 AGE125
Switching on and off
Brief operation without engaged switch
rocker

Push the switch rocker forwards and hold
in position.

To switch off the power tool, release
the switch rocker.
Continuous operation with engaged
switch rocker

Push the switch rocker forwards (1.) and
engage by pressing the front end (2.).

To switch off the power tool, release the
switch rocker by pressing the rear end.
NOTE
Following a power failure, the switched on
power tool does not restart.
CAUTION!
Risk of injury due to destruction of the tool.
Use the appropriate tool for the job.
NOTE
If an overload or overheating occurs during
continues operation, the power tool auto-
matically reduces the speed until the power
tool has cooled down adequately.
Adjusting the guard
To adjust the tool to the task at hand, the
guard hood can be adjusted by 12 notches
on 360° without a tool.
CAUTION!
Risk of injury! Wear protective gloves.

Pull out the mains plug.

Turn guard hood opposite to the
direction-of-rotation arrow on the gear
head to the required position.
Work instructions
NOTE
When the power tool is switched off,
the grinding tool continues running briefly.
Rough-grinding
WARNING!
Never use cutting-off wheels for rough-
grinding.
– Angle of wheel 20–40° for best cutting
performance.
– Applying moderate pressure, move the
angle grinder backwards and forwards.
As a result, the workpiece will not
become too hot and there will be no
discoloration; nor will there be any
grooves.