typical GC6760 SERIES, Руководство по установке, инструкции и обслуживанию

Страница: 29 / 56

29
1
2
1
1
TYPICAL GC6760 Series
8 // CLEANING AND MAINTENANCE
8/1/2 Checking the transmission oil level
When the machine is tilted backwards for a while the oil
amount in the felt will diminish put the oil level on the oil sight
window (1) will raise. The exact amount of oil can´t be read.
For this reason check the oil level immediately after tilting the
machine backwards.
The oil level reading on the oil sight window (1) can vary de-
pending on the angle of the tilted machine. Make sure that the
sewing head support (2) is installed in the right position. The
correct position of the sewing head support (2) is shown in the
table-top drawing on page 12.
The oil level should be approx. 1 mm above the center mark on
the oil sight window(1). By delivery of the machine ex works
there is 70 ml oil supplied.
1. Check the oil level by looking from the front
at the oil sight window.
2. If the oil level is to low refi ll oil.
approx.
1 mm