typical GC6760 SERIES, Руководство по установке, инструкции и обслуживанию

Страница: 21 / 56

21
1
2
3
5
6
7
8
9
10
11
12
13
4
4
3
2
1
1
14
35 - 40 mm
TYPICAL GC6760 Series
Caution
Switch off machine before inserting the bobbin case.
Injury may occur if foot pedal is pressed accidently.
Caution
Switch off machine before inserting the bobbin case.
Injury may occur if foot pedal is pressed accidently.
5 // SETTING UP
5/4 Inserting the bobbin case
1. Turn the hand wheel until needle is above the needle
plate.
2. Put the bobbin in the bobbin case that it turns clockwise
when you pull the thread. (Illustration 2)
3. Pull the thread in the slot (1) under the tension spring (2)
and through the tread guide (3) (Illustration 2)
4. Check if the bobbin turns clockwise when you pull the
thread. (Illustration 2)
5. Hold the bobbin case on the latch (4) and insert into the
hook. (Illustration 3)
5/5 Threading the machine
1. Bring the take up lever (1) in the highest position by
turning the hand wheel. This will make it easier to thread
the machine. It will also make sure that the tread is not
pulled out when you start the machine.
Illustration 1 Illustration 2
Illustration 3