System Setting
Flight Setting
Model Select
MODE
Model: 4K
WELCOMEPILOT
11:25:11am
Watch
GPS
N/A
SAT
N/A
POS
N/A E
N/A N
VOLTS
N/A V
ALT
N/A ft
G-SPD
N/A mph
DIS
N/A ft
3840 x 2160 F30
WATCH ME FUNCTION
Watch Me function enables the camera to keep tracking the remote control-
ler no matter where and how it moves as the camera can automatically tilt its
angle according to the controller.
Usually, the default function under Smart Mode is Follow Me. Watch Me
function can be switched to by following steps:
15
In Watch Me function, the pilot will always be kept in the frame wherever
he moves.
Model: 4K
Welcome,Pilot
10:48:28 pm 10
GPS
Ready
SAT
13
POS
00.0000E
00.0000N
MODE
Watch
ALT
21.4 ft
VOLTS
12.3 V
G-SPD
0.0 mph
DIS
22.5 ft
System Settings
Flight Settings
Model Select
3840 x 2160 F30
Press , the button will change from ORANGE to GREEN. And now it is
in Watch Me function.
NOTE: Once the TYPHOON is above 2m and out of Smart Circle during
flying, the TYPHOON yaw direction will take the control itself. Camera
lens will always point to you as long as Flight Mode Selection Switch is in
Smart Mode. Please put the CGO3 Pitch Angle/Position Control Slider in
the middle position. If you want to trim the camera angle up, then just
move the Pitch Angle/Position Control Slider a bit up. If you want to trim
the camera angle down, just move the slider down.
Watch Me/Follow Me Button: When in Smart Mode, press to switch
the TYPHOON between Watch Me and Follow me function. Follow Me
function is the default setting, and the button is ORANGE. If it is GREY,
it means ST10+ GPS isn’t ready yet. Please wait.
Welcome,Pilot
10:48:28 pm 10
GPS
Ready
SAT
13
POS
00.0000E
00.0000N
MODE
Follow
ALT
21.4 ft
VOLTS
12.3 V
G-SPD
0.0 mph
DIS
22.5 ft
System Settings
Flight Settings
Model Select
3840 x 2160 F30
Model: 4K
Содержание Q500 4K
Страница 1: ...Version 2 0 ...
Страница 20: ...19 ...