Compass Calibration
Step 5)
When the main LED status
indicator flashes red and green
slowly (2 times per second) you
have entered compass calibration
mode. Pick up the aircraft and hold
it flat with the nose pointed to the
north. After 5 seconds the main
LED status indicator should flash
red and green rapidly (5 times per
second).
Step 7)
Rotate the aircraft 45
degrees to the left. Then slowly
rotate the aircraft 360 degrees
toward the north (as illustrated)
until it's flat and upright in your
hands again.
Step 6)
Slowly rotate the aircraft
360 degrees toward the north (as
illustrated) until it's flat and upright
in your hands again.
Step 8)
Rotate the aircraft 45
degrees to the left. Then slowly
rotate the aircraft 360 degrees
toward the north (as illustrated)
until it's flat and upright in your
hands again.
Step 1)
Do not calibrate the compass
inside parking structures, near
buildings or surfaces with metal in
them (like roads parking lots with
rebar). Only calibrate the compass in
open areas/fields far away from
power lines and other metallic or
concrete surfaces/structures
.
Step 2)
Turn on the transmitter and
allow it to boot up fully before
turning on the aircraft. And when
the transmitter and aircraft are
powered on and linked proceed to
the next step.
25
Step 4)
If successful, THPHOON
will beep, Return to the main
screen. 'Mag Cali' will be displayed
in MODE area.
CAMERA
MULTICOPTER
Video Settings
Audio Switch
GPS
Calibration
OFF
ON
Compass
Accelerometer
Step 3)
Tap the Setting button
on
the ST10+ screen, then tap the
Calibration button. Choose Compass
option and tap it.
Model:Q500 4K
Welcome,Pilot
07:25
GPS
N/A
SAT
N/A
POS
N/A E
N/A N
MODE
Mag Cali
ALT
N/A ft
VOLTS
N/A V
G-SPD
N/A mph
DIS
N/A ft
System Settings
Flight Settings
Model Select
WB
ISO 32
1/250s
Auto
Auto
Lock
Sunny
Cloudy
Fluorescent
AWB
3840 x 2160 F30
Содержание Q500 4K
Страница 1: ...Version 2 0 ...
Страница 20: ...19 ...