| Installation Quick Guide
1st Step: Mechanical Installation
1
Mark mounting holes for camera, transmitter, and antenna
2
Install the HD transmitter
3
Attach camera and antenna
4
Connect the HD receiver antennas and mounting case
Consider camera
cable length.
HD receiver can be
mounted on a tripod
Recommended to
position antennas
straight up
Snap the HD
receiver into the
mounting case
Optionally, fasten with
plastic ties
Camera can be
installed upside
down
Use the dampers to avoid Jello
effect. Secure dampers with pins
and locking clips
Mount the antenna
on the back of the
drone
Doc P/N: 9040962 | Rev 01 | Printed 06/17/16
