Tymetal Corp. TYM-VSA, Инструкция по установке и эксплуатации, Страница: 4 / 36

TYM-VS2 Slide Gate Operator Installation Guide
- 2 -
Revision 0, 072012
-
Refer to the following steps for details on power and
accessory wiring for the operator.
AC Power Wiring
DO NOT EXCEED THE MAXIMUM
DISTANCE.
The green
ground wire must be properly connected.
7. LOCAL EARTH GROUND REQUIRED
DC Control and Accessory Wiring
Note:
The shield wire should be connected in both the
operators.
WARNING
ALL AC ELECTRICAL CONNECTIONS TO THE POWER
SOURCE AND THE OPERATOR MUST BE MADE BY A
LICENSED ELECTRICIAN AND MUST OBSERVE ALL
NATIONAL AND LOCAL ELECTRICAL CODES.
MODEL TYM-VS2 SINGLE PHASE POWER WIRING
VOLTS, HP &
AMPERAGE
MAXIMUM DISTANCE
(FEET)
WIRE
GAUGE
SINGLE DUAL
MODEL TYM-VS2 THREE PHASE POWER WIRING
VOLTS, HP &
AMPERAGE
MAXIMUM DISTANCE
(FEET)
WIRE
GAUGE
SINGLE DUAL
Figure 1. Earth Ground