TYM TX753, Руководство пользователя

Страница: 90 / 180

2 - 0
2 - 1
DESCRIPTION OF OPERATING SYSTEM
2 - 0
2 - 1
Top link
adjusting lever
Adjusting handle
2C0B 80C11A 2C05A
B
A
C
TOP lINK ADJuSTMENT
(1) The angle of an implement can
be adjusted by extending or re-
tracting the top link.
(2) After adjustment, fix the adjust-
ing lever with its mounting nut.
() The mounting location of the top
link is different by the type of
an implement. The 1st and 2nd
holes from the top are generally
used.
► TOP lINK BRACKET

General work - Fit the link lock
pin to the hole (A).

Draft control - Move the pin in the
hole (A) to the hole (B)
and fit the top link to the
hole (C).
►
The draft control function is not
activated while the pin is fitted
into the hole.
•
NOTE
lIFT ROD ADJuSTMENT (lh/Rh)
Turn the handle clockwise to retract
the rod and turn it counterclockwise
to extend the rod.
Adjust the length of the lift rod to
keep the implement horizontal.
(1) To adjust the height,
Lift the adjusting handle. After
adjustment, lower the handle
and fix it.
(2) Adjust the length according to
the characteristics of the imple-
ment.
►
TX753,TX853-영문-02(나).indd 40 2014-04-23 오후 4:58:12