TYM TX753 Скачать руководство пользователя страница 128

Страница: 128 / 180

5 - 10

Maintenance and service

7. checking and cleaning air cleaner

Check and clean the air cleaner ac-

cording to the following instructions:

853O50a

8. adjusting tread

adjusting frOnt wheel tread

It can be adjusted in two steps by

switching the left and right tires and

discs.

adjusting rear wheel tread

It can be adjusted in four steps by

switching the left and right tires and

discs.

►

853O01a

Element (inner/outer)

Body filter

Vacuum

valve

< cautions for inspection and

service of air cleaner >

(1) Use the standard element and fil

ter and do not apply oil on them.

() Remove any dust in the cover

thoroughly.

(3) Install it firmly so that dust does

not enter below the cover.

() Never drive with the element and

filter removed.

(5) Replace the air cleaner fi

lter and

element according to their re-

placement schedule and when

their indicator comes on.

Do not hit the element with

a rock or concrete during its

cleaning.
Make sure to install the element

firmly.

Tighten each part of the air

cleaner securely to block dust

completely.

•

NOTE

after adjusting the wheel tread,

the vehicle's breadth and turn-

ing radius are changed. Keep

this in mind during driving.

•

CAUTION

for safety, have tread adjust-

ment performed by your dealer

or workshop.
Never remove tires if there is

no safe supporting device. The

tractor can roll over.

•

WARNING

TX753,TX853-영문-05(마).indd 10

2014-04-05 오전 10:03:05

Содержание TX753





















































































































































































Результаты поиска

Содержание TX753

Отзывы:

Бренды по названию

Популярные бренды

TYM TX753, Руководство пользователя

Результаты поиска

Содержание TX753

Отзывы:

Бренды по названию

Популярные бренды