TYM TX753, Руководство пользователя

Страница: 45 / 180

1 - 5
GENERAL INFORMATION
1
2. SAFETY SIGNS

In order to work with the machine safely, safety decals are placed on the machine.

Make sure to read and follow the directions.
■
Keep the safety decals clean and not damaged at all times.
If a safety decal on the machine is dirty, wash it with soapy water and wipe it off with a soft cloth.
Never use solution as thinner or acetone because these can erase characters or pictures.
■
If washed with high-pressured water, a decal may be peeled off.
do not apply high-pressured water directly onto decals.
■
If a safety decal is damaged or lost, order a new one immediately and place it on
the machine.
When putting a new decal, wipe off the place to post the decal thoroughly and wait till it is dried. Then post
the decal.
Each decal has a part number on the bottom.
■
When replacing a part attached with a decal with a new part, replace the decal as
well.
lift rod (Rh) (horizontal balance
control cylinder)(Optional)
TX753,TX853-영문-01(가).indd 5 2014-04-23 오후 4:40:43