TYM TX753, Руководство пользователя

Страница: 104 / 180

3 -
OPERATION
3. ENgINE IdlINg
gENERAl ENgINE IdlINg
After starting the engine, idle the en -
gine for 5 to 10 minutes so that oil is
delivered to each part of the engine.
►
If the engine is loaded right af -
ter it is started, it may cause en -
gine stalling and failure. Make
sure to idle the engine first.
If neglecting to idle the engine,
it can cause:
- Seizure of the hydraulic pump
- Filure in the hydraulic system.
•
•
NOTE
Make sure to apply the parking
brake while idling the engine.
Never idle the engine in a poor
-
ly ventilated area. It can cause
carbon monoxide poisoning by
emissions.
•
•
WARNING
ENgINE IdlINg IN COld CONdITION
Hydraulic oil in this vehicle is also
used as transmission fluid.
If the temperature drops in winter so
oil gets cold, its viscosity rises and
the hydraulic pump cannot suck oil
in, causing malfunction.
Make sure to idle the engine in
winter according to the following in -
structions.
►
Temperature Idling time
0°C or higher At least 10 min
0 ~ -10°C 10 ~ 20 min.
-10 ~ -0°C 20 ~ 30 min.
-0°C or less At least 30 min.
Make sure to keep the following in -
structions for the initial 50-hour use.
(1) Avoid abrupt starting and abrupt
stopping.
(2) Do not use excessive speed or
load.
(3) Drive the tractor only when the
engine is sufficiently warm.
(4) Do not idle the engine at the
maximum speed.
(5) Check each part and change oil
and fluid after 50-hour use.
(6) Refer to the section Maintenance
for adding and changing engine
oil.
4. RuNNINg-IN PERIOd
TX753,TX853-영문-03(다).indd 4 2014-04-04 오후 6:06:16