TYM TX1500 Скачать руководство пользователя страница 25

Страница: 25 / 218

FOR SAFE OPERATION

- 1

WARNING

When loading the machine, drive it

backward.



Ensure that the right and left

brake pedals are interlocked.



Do not turn the steering wheel

too much on the ramp boards.

Do not depress the clutch pedal on

the ramp boards to stop the ma-

chine.



In order not to stop the machine

during loading and unloading,

ensure the ramps are straightly

lined up safely with a proper in-

terval between them.

When loading the machine on the

vehicle, shift the main shift lever of

the rice planting machine to 1st or

reverse gear, and apply the park-

ing brake, securing the rice plant-

ing machine with strong ropes.

If driving forward up to the steep

slope, it leads to a roll over acci-

dent because the rear part of the

machine is heavier.

Engine brake is not engaged so

that the machine can fall abruptly

that may lead to an accident.

The machine can fall off of the

truck.

llo

t F

llo

Whoops!

Kwadang!!

TX1500-영문-00(안).indd 21

2012-12-17 오후 2:22:25

Содержание TX1500



























































































































































































































Результаты поиска

Содержание TX1500

Отзывы:

Похожие инструкции для TX1500

Бренды по названию

Популярные бренды

TYM TX1500, Руководство пользователя

Результаты поиска

Содержание TX1500

Отзывы:

Похожие инструкции для TX1500

Бренды по названию

Популярные бренды