TYM T431 Скачать руководство пользователя страница 76 | Manualshive

Страница: 76 / 108

TYM T431 Скачать руководство пользователя страница 76

Working lamps (front and rear) :

the working lamps are located on the cab roof (two in the
front and two in the rear) .They are switched on by means
of the special switches on the roof console

Rearview mirrors.:

the cab is provided with rearview mirrors on both sides. They can be adjusted and folded, whenever
necessary, to avoid interference with external obstacles.

The mirror have a telescopic arm to allow positioning for maximum convenience by the user.

Remember that mirrors must always be positioned in compliance with road traffic regulations when
driving on a public highway.

Cab ceiling:

The ceiling is padded with insulation material to block heat radiation into the cab and keep the
temperature down when working in very sunny areas.

The cab platform is covered with a “firm grip” carpet in the most commonly used areas.

It is recommended to keep this carpet clear of earth, mud, etc. so that the operator may get on and off
the tractor in full safety.

How to Controls Cabin

75

«
...
74
75
76
77
78
...
»

Содержание T431













































































































Отзывы:

Нет отзывов