TYM T431 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 108

TYM T431 Скачать руководство пользователя страница 13

SAFETY INSTRUCTIONS

SIGNAL WORDS.

A signal word

―

DANGER, WARNING OR CAUTION

―

is

used with safety alert symbol. DANGER identifies the most
serious hazards. Safety signs with signal Word

―

DANGER OR

WARNING

―

are typically near specific hazards. General

precautions are listed on CAUTION safety signs.

DANGER

WARNING

CAUTION

RECOGNIZE SAFETY INFORMATION

This symbol means ATTENTION! YOUR SAFETY IS
INVOLVED. The message that follows the symbol contains
important information about safety. Carefully read the message

READ SAFETY INSTRUCTION

Carefully read all safety instructions given in this manual for
your safety. Tempering with any of the safety devices can
cause serious injuries or death. Keep all safety signs in good
condition. Replace missing or damaged safety signs.

Keep your tractor in proper condition and do not allow any
unauthorized modifications to be carried out on the Tractor,
which may impair the function/safety and affect Tractor life.

PROTECTION CHILDREN

Keep children and others away from the Tractor while
operating.

BEFORE YOU REVERSE

- Look behind Tractor for children.

- Do not let children to ride on Tractor or any

implement.

12

«
...
11
12
13
14
15
...
»

Содержание T431













































































































Отзывы:

Нет отзывов