TYM T431 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 108

TYM T431 Скачать руководство пользователя страница 11

Damage of the ROPS

If the tractor has rolled over or the ROPS has damaged (such as striking an overhead object during
transport), It must be replaced to provide the original protection. After an accident, check for damages
to the 1.ROPS.2.Seat 3.seat belt & seat mountings. Before you operate a Tractor, replace all damaged
parts.

10

DO NOT WELD, DRILL OR STRAIGHTEN THE ROPS

Warning

Never attach chains, ropes to the ROPS for pulling purposes; this will
cause the Tractor to tip backwards. Always pull from the Tractor drawbar.
Be careful when driving through door opening or under low overhead
objects. Make sure there is sufficient overhead clearance for the ROPS
fatal injuries

Warning

If the ROPS is removed or replaced, make certain that the proper hardware
is used to replace the ROPS and the recommended torque values are
applied to the attaching bolts

Warning

Always wear your seat belt if the tractor is equipped with ROPS

«
...
9
10
11
12
13
...
»

Содержание T431













































































































Отзывы:

Нет отзывов