TYM T431, Руководство оператора, Страница: 27 / 108

SAFETY SIGNS
(Replace all missing, damaged or illegible signs)
GENERAL SAFETY INFORMATION
IMPORTANT: This “General safety Information” should be kept with the machine at all times as
reference data.
This symbol means ATTENTION! YOUR SAFETY IS INVOLVED.
The message that follows the symbol contains important information about safety.
Follow recommended precautions and safe operating practice.
WARNING
• Before starting and operating know the operating
and safety instructions in the operators Manual
and on the tractor
• Do not permit anyone but the operator to
ride on the tractor. There is no safe place
for rider.
26
and on the tractor
• Clear the area of bystanders.
• Locate and know operation of controls.
• Start engine only from Operator’s seat with
depressed clutch pedal, transmission in the
neutral, PTO disengaged and hydraulic control in
lower position
• Slow down on turns, rough ground and slopes to
avoid upset.
for rider.
• Lock brakes together, use warning lights
and SMV emblem while driving on roads.
• Lower equipment, place gear shift levers
in neutral, stop engine, remove the key
and apply parking brake before leaving
the tractor seat.
• Air pressures are specified by the
manufacturer
FAILURE TO FOLLOW ANY OF THE INSTRUCTIONS ABOVE CAN CAUSE SERIOUS
INJURY TO THE OPERATOR.
Location: On fender RH
Part No.: 1260-904-070-1A
TO AVOID POSSIBLE
PERSONAL INJURY, THIS GUARD
MUST BE KEPT IN PLACE
Location: ON PTO guard
Part No.: 1260-904-069-0A
Warning