TyconSolar UPSPro UPSTL48, Руководство пользователя

Страница: 6 / 8

6
6. BATTERY OVERDISCHARGE : We highly recommend hooking all
equipment loads to the controller voltage output. This output will discon-
nect the load if the battery voltage drops below the set voltage and this
will protect the battery from over - discharge. If batteries get completely
discharged because the equipment was connected directly to the bat-
tery, you will reduce the battery life. Discharged batteries will freeze at
very low temperatures.
7. SOLAR READY: The system is solar ready so solar panels can be
added at any time by connecting them to the PV input through a block-
ing diode. The battery charge controller can handle up to 20A of solar
which is equivalent to 960W of solar panels max. A single blocking di-
ode is needed to prevent reverse current from battery charger power
supply into the solar panels. Blocking diode should be at least 6A/100V
rated.
8. ACCESSORIES : Tycon
®
also offers a variety of voltage conversion
products to meet almost any need. Just visit tyconsystems.com for
more info.
Limited Warranty
The UPSPro
®
products are supplied with a limited 36 month warranty
which covers material and workmanship defects. This warranty does
not cover the following:
▫ Parts requiring replacement due to improper installation, misuse,
poor site conditions, faulty power, etc.
▫ Lightning or weather damage.
▫ Physical damage to the external & internal parts.
▫ Products that have been opened, altered, or defaced.
▫ Water damage for units that were not mounted according to user
manual.
▫ Usage other than in accordance with instructions and the normal
intended use.
Tycon Systems Inc.
14641 S 800 W Suite A
Bluffdale, UT 84065
support@tyconsystems.com
PH: 801 - 432 - 0003