8
mins for reboot.
8.
UPGRADE FIRMWARE
: For the latest firmware point your
browser to
http://ez-bridge.com/support/support.htm
Download the
latest firmware to your PC. Select UPGRADE from the menu and then
browse for the new file.
9.
CHANGING TO CLIENT
: The EZ-Bridge™ can be changed to a cli-
ent device on the WIRELESS|BASIC SETTINGS page. You might
change to client if you wanted to have multiple units communicating
with a single access point. If changing to client, make sure the BSSID
field is changed to all zero’s or else client will lose connection with the
AP after any reboot.
10.
CHANGING TO ACCESS POINT
: The EZ-Bridge™ can be
changed to an access point device on the WIRELESS|BASIC SET-
TINGS page. You might want to change one unit to access point if you
will have multiple clients bridging in a point to multipoint configuration.
11.
WDS MESH NETWORK
: You can add additional EZ-Bridge™
units or EZ-Go
®
Network Expansion units to link 3 or more buildings
together. We suggest maximum of 6 buildings and for better perfor-
mance, no more than 4. To add an EZ-Bridge™or EZ-Go
®
unit to the
existing EZ-Bridge network, you set the operating mode to WDS and
you program the remote units MAC address into the local units WDS
table and the local units MAC address into the remote units WDS table.
The WDS table is found under WDS SETTINGS from the main menu
after setting the device to WDS. The MAC address for each unit is
found on the STATUS page or can be found using the Discovery Tool.
When entering MAC’s you enter just the HEX characters without the
“:” (colon)
Advanced Features
The EZ-Bridge™
has many advanced features if more functionality is
desired. To access the advanced features, click on
Advanced Web
at
the top of the menu tree. This will activate the advanced menu options.
The EZ-Bridge™ can operate as Access Point, Client, WDS, AP+WDS,
Point to Point. Go to WIRELESS | BASIC SETTINGS to change wire-
less mode. Go to ETHERNET | IP SETTINGS to change network oper-
ation mode from Bridge (default) to Router.
Since documentation for these advanced modes is too extensive to
cover here please retrieve the documentation online at
http://ez-
bridge.com/support/support.htm
