12
D-306042 WK160
User’s Guide
Number
Indication
[1]
What it Means
+
Selected PGM or X-10 unit number.
+
Volume level
PGM/X-10 control mode.
System is armed in LATCHKEY mode.
Exit beeps are shut off. This mode disables when
the exit delay is over.
[2]
System is armed in the INSTANT mode.
A message is waiting in the system.
The control panel is presently in "INSTALLER
MODE" or "USER SETTINGS".
Memory / Alarm in partition or system.
The partition / system has an active trouble
status that needs to be reviewed and cleared.
[3]
AC failure.
Communication failure: WK160 is out of range of
the control panel or did not get an acknowledge
signal of a command from the control panel.
Indicates that the WK160 device's battery is low
and must be replaced (see section 2.1).
[1] The key indication is displayed after the first red LED blinks indicating the status request.
[2] Operates only during Exit Delay.
[3] See respective sections in the control panel's User and Installer's Guides.
[4] If there is more than one status indication at a single time, the keys are displayed
simultaneously.
