TYAN Tigercub 100 S1894 Скачать руководство пользователя

Страница: 70 / 85

http://www.tyan.com

2) If you are using MS-DOS 6.x, you can use the feature that allows you to

bypass the CONFIG.SYS and AUTOEXEC.BAT files. You can access this

feature by pressing <F5> while the Starting MS-DOS... line is on the screen

during boot-up.

If you are uncertain whether or not you have a memory manager running, try

FMW. If it works, then there is no active memory manager on your system. If

you see a warning message about the CPU mode, follow the above directions

to get around the memory manager.

Once you have your CPU in real mode, you can run FMW. You can copy the

contents of the Flash directory to your hard drive, or you can run the utility

from a backup of the support floppy disk. Either way, make sure that the new

BIOS file is in the same directory as the FMW utility.

To start FMW, change to the Flash directory if you are not already in it.

Type awdflash at the DOS command line and press the <Enter> key. The

FMW utility screen will appear:

Type in the whole file name, e.g. A61AW10.BIN, and confirm that you want to

program the BIOS. The utility will then Blank, Erase, and Program the

flash memory on the mainboard with the new BIOS file. You should choose

Yes to save the original system BIOS to a floppy diskette

before

you

program the new BIOS. This leaves you with a backup of your original BIOS in

case you need to re-install it. If you cannot successfully program the new

BIOS file for some reason, re-install your original BIOS from the backup file.

Remember, always reset the CMOS after flashing to a new BIOS (see page 30).

Chapter 4

BIOS Configuration

For VX/HX-2A59CT51

Date:4/13/98

File Name to Program:

Error Message:

FLASH MEMORY WRITER V3.0

All manuals and user guides at all-guides.com

Содержание Tigercub 100 S1894






















































































Результаты поиска

Содержание Tigercub 100 S1894

Отзывы:

Похожие инструкции для Tigercub 100 S1894

Бренды по названию

Популярные бренды

TYAN Tigercub 100 S1894, Руководство пользователя

Результаты поиска

Содержание Tigercub 100 S1894

Отзывы:

Похожие инструкции для Tigercub 100 S1894

Бренды по названию

Популярные бренды