S1894 Tigercub 100
13
The colored stripe on the cable indicating pin 1 should face towards the rear of
the case (towards the ATX connectors).
In Figure 3 you can see how the IDE cables should look when they are
connected to your hard
drive. Notice how Pin 1
(denoted by a red stripe) is
connected so that it is next
to the power connector of
the drive. In most cases,
this is the proper way of
connecting your IDE cable
to the hard drive.
Figure 4 shows the IDE
cable properly connected
to the motherboard.
Contact your hard disk
drive manufacturer or
documentation for more
information.
INST
A
L
L
Figure 3
Figure 4
Pin 1
All manuals and user guides at all-guides.com
