manualshive.com logo in svg

TYAN Tigercub 100 S1894, Руководство пользователя

Поделиться
Скачать
TYAN Tigercub 100 S1894 Скачать руководство пользователя страница 53

S1894   Tigercub 100

53

BIOS

controller in your system. When Enabled, you can select a typematic rate and

typematic delay.

Typematic Rate (Chars/Sec)

When the typematic rate setting is enabled, you can select a typematic rate

(the rate at which character repeats when you hold down a key) of 6, 8, 10,12,

15, 20, 24 or 30 characters per second.

Typematic Delay (Msec)

When the typematic rate setting is enabled, you can select a typematic delay

(the delay before key strokes begin to repeat) of 250, 500, 750 or 1000 millisec-

onds.

Security Option

If you have set a password, select whether the password is required every time

the System boots, or only when you enter Setup.

PCI/VGA Palette Snoop

Your BIOS Setup many not contain this field. If the field is present, leave at

Disabled.

PS/2 Mouse Function Control

This option should be disabled if you do not wish to install a PS/2 mouse or if

you want to use IRQ12 for another device.

OS Select for DRAM > 64MB

Select OS2 only if you are running OS/2 operating system with greater than 64

MB of RAM on your system.

Report No FDD for Win95

Select “yes” to this option only IF you do not want to install an FDD and if

you do not want Win95 to check for an FDD (Floppy Disk Drive).

Shadow

Software that resides in a read-only memory (ROM) chip on a device is called

firmware. The EliteBIOS permits shadowing of firmware such as the system

BIOS, video BIOS, and similar operating instructions that come with some

expansion peripherals, such as, for example, a SCSI adaptor.

Shadowing copies firmware from ROM into system RAM, where the CPU can

read it through the 16-bit or 32-bit DRAM bus. Firmware not shadowed must

All manuals and user guides at all-guides.com

Содержание Tigercub 100 S1894






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды