27
Mounting Locks
installed bracket can be verified by making sure that the four pins on
the top are closest to the Pentium II CPU slot.
2. Insert the heat sink mount into the holes on
the motherboard. When the bracket is prop-
erly inserted into the holes on the
motherboard, you will hear a clicking noise.
3. Lock the heat sink mount to the board by
inserting the two mounting locks into the pins
of the heat sink mounting bracket which are
now below the mainboard. There will be a
click when the locks are securely fastened.
Installing the Passive Processor
1. Align the CPU with the CPU retention module. Make sure the heat
sink is lined up with the heat sink mount bracket. If you put the CPU in
the wrong way, you may damage the CPU, the motherboard, and/or the
CPU socket.
2. Slowly press down on the CPU module until the CPU locks into
place. A clicking noise will be heard when the CPU is locked securely
into the module.
Installing Heat Sink Locks
The heat sink lock has four notches which will correspond to the four
pins on the heat sink mounting bracket. Gently slide the lock between
the heat sink onto the heat
sink mounting bracket until
both sides of the lock are
firmly secured. A clicking
sound will be heard when the
lock is securely fastened to
the heat sink mounting bracket. To remove the lock from the heat sink
mounting bracket, gently press the ends of the locks inward and pull.
ONBOARD
Heat Sink Lock
