background image

Notice for the USA

Compliance Information Statement (Declaration of Conformity Proce-
dure) DoC
FCC Part 15: This Device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interfer-
ence that may cause undesired operation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Plug the equipment into an outlet on a circuit different from
that of the receiver.

Consult the dealer or an experienced radio/television
technician for help.

Notice for Canada

This apparatus complies with the Class B limits for radio interference
as specified in the Canadian Department of Communications Radio
Interference Regulations.

Cet appareil est conforme aux normes de Classe B d’ interference
radio tel que spécifié par le Ministére Canadien des Communications
dans les réglements d’interférence radio.

Notice for Europe (CE Mark)

This product is in conformity with the Council Directive 89/336/EEC,
92/31/EEC (EMC).

Содержание THUNDER 2 ATX









































































Отзывы: