TYAN Tank GT14 B5180, Руководство по обслуживанию

Страница: 84 / 121

Setup Basics
The table below shows how to navigate in the setup program using the
keyboard.
Key Function
Tab Moves from one selection to the next
Left/Right Arrow Keys Change from one menu to the next
Up/Down Arrow Keys More between selections
Enter Opens highlighted section
PgUp/PgDn Keys Change settings.
Getting Help
Pressing [
F1 ] will display a small help window that describes the
appropriate keys to use and the possible selections for the highlighted
item. To exit the Help Window, press [
ESC ] or the [ F1 ] key again.
In Case of Problems
If you discover that you have trouble booting the computer after making
and saving the changes with the BIOS setup program, you can restart
the computer by holding the power button down until the computer shuts
off (usually within 4 seconds); resetting by pressing CTRL-ALT-DEL; or
clearing the CMOS.
The best advice is to only alter settings that you thoroughly understand.
In particular, do not change settings in the Chipset section unless you
are absolutely sure of the outcome. The Chipset defaults were carefully
chosen by TYAN or your system manufacturer for the best performance
and reliability. Even a seemingly small change to the Chipset setup
options may cause the system to become unstable or unusable.
Setup Variations
Not all systems will have the same BIOS setup layout or options. While
the basic look and function of the BIOS setup remains more or less the
same for most systems, the appearance of your Setup screen may differ
from the charts shown in this section. Each system design and chipset
combination requires a custom configuration. In addition, the final
appearance of the Setup program depends on the system designer.
Your system designer may decide that certain items should not be
available for user configuration, and remove them from the BIOS setup
program.
NOTE: On the following pages, options written in bold type represent
the BIOS Setup default.
76 Chapter 4: BIOS Setup