TYAN S8020, Руководство пользователя

Страница: 118 / 168

http://www.tyan.com
118
TpAbl1MemFlowPStateSync
= 0xE0E8, ///< Memory flow P-State
synchronization
TpIfAfterRunApFromAllAps
= 0xE0E9, ///< After the BSP calls out to
run code on an AP
TpIfBeforeRunApFromAllCore0s
= 0xE0EA, ///< Before the BSP calls out
to
run code on an AP
TpIfAfterRunApFromAllCore0s
= 0xE0EB, ///< After the BSP calls out to
run code on an AP
TpIfBeforeAllocateS3SaveBuffer
= 0xE0EC, ///< Before the S3 save code
calls out to allocate a buffer
TpIfAfterAllocateS3SaveBuffer
= 0xE0ED, ///< After the S3 save code
calls out to allocate a buffer
TpIfBeforeAllocateMemoryS3SaveBu
ffer = 0xE0EE, ///< Before the memory S3
save code calls out to allocate a buffer
TpIfAfterAllocateMemoryS3SaveBuff
er = 0xE0EF, ///< After the memory S3 save
code calls out to allocate a buffer
TpIfBeforeLocateS3PciBuffer
= 0xE0F0, ///< Before the memory code
calls out to locate a buffer
TpIfAfterLocateS3PciBuffer
= 0xE0F1, ///< After the memory code
calls out to locate a buffer
TpIfBeforeLocateS3CPciBuffer
= 0xE0F2, ///< Before the memory code
calls out to locate a buffer
TpIfAfterLocateS3CPciBuffer
= 0xE0F3, ///< After the memory code
calls out to locate a buffer
TpIfBeforeLocateS3MsrBuffer
= 0xE0F4, ///< Before the memory code
calls out to locate a buffer
TpIfAfterLocateS3MsrBuffer
= 0xE0F5, ///< After the memory code
calls out to locate a buffer
TpIfBeforeLocateS3CMsrBuffer
= 0xE0F6, ///< Before the memory code
calls out to locate a buffer
TpIfAfterLocateS3CMsrBuffer
= 0xE0F7, ///< After the memory code
calls out to locate a buffer
TpReadyToBoot = 0xE0F8, ///< Ready to boot event
// PMU test points
TpProcMemPmuFailed = 0xE0F9, ///< Failed PMU training.
TpProcMemPhase1End = 0xE0FA, ///< End of phase 1 memory
code
TpProcMemPhase2End = 0xE0FB, ///< End of phase 2 memory
code
// ABL0 test points
TpAbl0Begin = 0xE0FC, ///< Abl0Begin
TpAbl0End = 0xE0FD, ///< ABL 0 End