TYAN S5353, Руководство пользователя

Страница: 48 / 90

48
http://www.tyan.com
3.4.1 Advanced Chipset Control
This section allows you to fine tune the chipset configuration.
PhoenixBIOS Setup Utility
Main
Advanced
Security Power Boot Exit
Advanced Chipset Control
Item Specific Help
X
Integrated Device Control Sub-Menu
X
Integrated LAN 1 (BCM5721)
X
Integrated LAN 2 (BCM5705)
X
Integrated LAN 3 (i82551)
Onboard XGI Video
Spectrum Spread
Force Compliance Mode
PCI-E port A1 Device 3:
DRAM Data Integrity Mode
ECC Error Type
SERR signal condition
Memory Remap Function
[Enabled]
[Disabled]
[Disabled]
[Auto]
[Auto]
[SMI]
[Single bit]
[Enabled]
These items determine
whether the integrated
PCI Devices will be
Enabled in PCI Config
space.
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
Esc Exit
← →
Select Menu Enter Select
X Sub-Menu F10 Previous Values
Onboard XGI Video
Toggles the onboard XGI video graphics.
Options:
Enabled
/ Disabled
Spectrum Spread
When enabled, this option modulates the frequency of the CPU clock rate (and
hence all clock driven mainboard components), so that any EMI interference
generated is not always at the same constant frequency, but instead is spread over
a small band of frequencies, therefore reducing problems with equipment that may
be particularly sensitive to certain fixed frequencies.
Options: Enabled /
Disabled
Force Compliance Mode
Enable or Disable PCI-E Compliance mode by setting item to the desired value.
Options: Enabled /
Disabled
PCI-E port A1 Device 3
The item control the PCI-E device which is plugged on the PCI-E slot to be disabled
or enabled.
Options: Disabled / Enabled /
Auto
DRAM Data Integrity Mode
If you have ECC memory modules installed, select the correct ECC mode with this
setting.
Options: Disabled / 72-bit ECC / 144-bit ECC /
Auto