TYAN S5353, Руководство пользователя

Страница: 45 / 90

45
http://www.tyan.com
Keyboard Error Report
Enabled BIOS keyboard error report; BIOS will display the keyboard error message
& save the event in DMI.
Disabled BIOS keyboard error report; BIOS will not warn & display the error
message.
Options:
Enabled
/ Disabled
Summary Screen
Enables or disables the display of the summary screen during boot up.
When Summary Screen is Enabled (the default), a Phoenix BIOS Setup Utility
summary screen appears during system boot after the power-on self-test (POST).
The summary screen lists many of the system setup settings. When this option is
set to Disabled, the summary screen does not appear.
Options:
Enabled
/ Disabled
Quiet Boot
Enables or disables the OEM logo screen during boot up.
Options: Enabled /
Disabled
Quick Boot Mode
This BIOS feature allows you to decrease the time it takes to boot up the computer
by shortening or skipping certain standard booting procedures.
If enabled, the BIOS will shorten the booting process by skipping some tests and
shortening others. In addition, it will also perform the following to further speed up
the booting process:
Spin up the hard disks as soon as power is supplied (or as soon as possible)
Initialize only critical parts of the chipset
Read memory size from the SPD (Serial Presence Detect) chip on the memory
modules
Eliminate logo delays
If disabled, the BIOS will run the whole gamut of boot-up tests.
It is recommended that you disable this feature when you boot up a new computer
for the first time or whenever you install a new piece of hardware. This allows the
BIOS to run full diagnostic tests to detect any problems that may slip past Quick
Boot's abbreviated testing scheme.
After a few error-free test runs, you should enable this feature for much faster
booting.
Options:
Enabled
/ Disabled
Extended Memory Testing
Determine the tests that will be run on extended memory (memory above 1MB)
during boot up.
Options: Normal /
Just zero it
/ None
Halt on POST Errors
Enabled -> BIOS will halt & display error message if there is any POST error .
Disabled -> BIOS will not halt if there is any POST error.
Options: Enabled /
Disabled