TYAN S5353, Руководство пользователя

Страница: 46 / 90

46
http://www.tyan.com
3.4 Advanced
This section facilitates configuring advanced BIOS options for your system.
PhoenixBIOS Setup Utility
Main
Advanced
Security Power Boot Exit
Item Specific Help
Installed O/S:
Reset Configuration Data:
Large Disk Access Mode:
Parallel ATA:
Serial ATA:
Native Mode Operation:
SATA RAID Enable
X
Advanced Chipset Control
X
Advanced Processor Options
X
I/O Device Configuratio
n
X
DMI Event Logging
Legacy USB Support:
X
Console Redirection
X
Hardware Monitor
[Win2000]
[No]
[DOS]
[Both]
[Enabled]
[Auto]
[Disabled]
[Disabled]
[Disabled]
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
Esc Exit
← →
Select Menu Enter Select
X
Sub-Menu F10 Previous Values
Installed OS
Select the operating system installed on the PC.
Note: An incorrect setting can cause the operating system to behave unpredictably.
Options: Other / Win95 / Win98 / WinMe /
Win2000
Reset Configuration Data
If you install a new piece of hardware or modify your computer's hardware
configuration, the BIOS will automatically detect the changes and reconfigure the
ESCD (Extended System Configuration Data). Therefore, there is usually no need
to manually force the BIOS to reconfigure the ESCD.
However, sometimes, the BIOS may not be able to detect the hardware changes. A
serious resource conflict may occur and the operating system may not even boot as
a result. This is where the Reset Configuration Data BIOS feature comes in.
This BIOS feature allows you to manually force the BIOS to clear the previously
saved ESCD data and reconfigure the settings. All you need to do is enable this
BIOS feature and then reboot your computer. The new ESCD should resolve the
conflict and allow the operating system to load normally.
Please note that the BIOS will automatically reset it to the default setting of No after
reconfiguring the new ESCD. So, there is no need for you to manually disable this
feature after rebooting.
Options: Yes /
No