Tomcat i875PF S5105
Chapter 4: SATA/RAID Setup
56
http://www.tyan.com
NOTE
Creating a RAID volume from an existing disk can also be
accomplished by clicking on the ‘RAID’ file menu, and then arrow
down and click on 'Create Volume from Existing Disk'.
For Step 1, select the source disk that you wish to use and then click ‘Next’:
It is very important to note which disk is the source disk (the one
containing all of the information to be migrated) and which one is the
target disk. On a RAID Ready system, this can be determined by
making a note during POST of which port (e.g. Port 0 or Port 1) the
single disk is attached to. You can also use the Intel® Application
Accelerator RAID Edition utility before the second disk is installed to
verify the Port and serial number of the drive that contains all the data.
