Tomcat i875PF S5105
Chapter 4: SATA/RAID Setup
49
http://www.tyan.com
4.3 Creating, Deleting, and Resetting RAID Volumes
The Serial ATA RAID sets must be configured in the RAID Configuration utility. This
configuration can be done by the Intel® RAID Option ROM. During the Power-On Self Test
(POST), the following message will appear for a few seconds: Press
<Ctrl-I>
to enter RAID
Configuration Utility. After this message appears, press the
<Ctrl>
and
<I>
keys
simultaneously, the following screen menu appears.
NOTE
The ‘Drive Model’, ‘Serial #’, and ‘Size’ listed in your system can differ
from the following example.
Intel ® Integrated RAID for Serial ATA – RAID Configuration Utility
Copyright © 2003 Intel Corporation. All Rights Reserved. V3.5.0.2568
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
RAID Volumes:
None defined.
Non-RAID Disks:
Port
Drive Model
Serial #
Size
Status
Bootable
0 Maxtor 6Y080MO
xxxxxxxx
18.6GB
Normal
Yes
1 Maxtor 6Y080MO
xxxxxxxx
18.6GB
Normal
Yes
[
↑
↓
] – Select [ESC] Exit [ Enter] – Select Menu
[ DISK/VOLUME INFORMATION
]
[ MAIN MENU ]