http://www.TYAN.com
52
Feature
Option
Description
Onboard Device & PCI Slots Configuration
Enabled
100/10Mbit LAN Option
Rom
Disabled
Allows user to enable or disable
onboard 100/10Mbit LAN controller
option ROM (PXE Enabled /
Disabled).
Enabled
PCI1 Slot (64bit)
Disabled
Allows user to enable or disable
device in PCI slot 1.
Enabled
PCI2 Slot (64bit)
Disabled
Allows user to enable or disable
device in PCI slot 2.
Enabled
PCI3 Slot (64bit)
Disabled
Allows user to enable or disable
device in PCI slot 3.
Enabled
PCI4 Slot (64bit)
Disabled
Allows user to enable or disable
device in PCI slot 4.
Enabled
PCI5 Slot (32bit)
Disabled
Allows user to enable or disable
device in PCI slot 5.
3.04.9 – Remote Access Configuration Sub-Menu
You can use this screen to view the Remote Access Configuration
Menu. This feature
allows access to the Server remotely via serial port. Use the up and down arrow (
á
/
â
)
keys to select an item. Use the Plus and Minus (+/-) keys to change the value of the
selected option. The settings are described on the following pages.
BIOS Setup Utility
Main
Advanced
PCI/PnP Boot Security Chipset Power Exit
Configure Remote Access type and parameters
Remote Access [SMDC]
Serial port number [COM1]
Serial port Mode [115200 8,n,1]
Flow Control [None]
Redirection After BIOS POST [Disabled]
Terminal Type [ANSI]
VT-UTF8 Combo Key Support [Disabled]
Use [ENTER], [TAB]
or [SHIFT_TAB] to
select a field
Use [+] or [-] to
configure system time.
?
?
Select Screen
? ?
Select Item
+/- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
Feature
Option
Description
Configure Remote Access type and parameters
SMDC
Enabled
Remote Access
Disabled
Enables remote access to system
through serial port.
If SMDC selected and the card
found, R.A. over COM2 and
configure to [19200bps], [8n1],
[None Flow Control], [Redirect
Always On After POST]