TYAN S2882-D, Руководство пользователя

Страница: 13 / 80

http://www.TYAN.com
13
2.05 – Clear CMOS Jumper (J8)
3
1
Default
3
1
Clear
CPU1 DIMM3 CPU1 DIMM2 CPU1 DIMM1 CPU1 DIMM4
CPU2
CPU2 DIMM2 CPU2 DIMM3 CPU2 DIMM4 CPU2 DIMM1
CPU1
You can reset the CMOS settings by
using this jumper if you have forgotten
your system/setup password or need to
clear system BIOS setting.
-
Power off system and disconnect
both power connectors from the
motherboard
-
Use jumper cap to close Pin_2 and
Pin_3 for several seconds to Clear
CMOS
- Put jumper cap back to Pin_1 and
Pin_2 (default setting)
Reconnect power & power on system
2.06 – SMBus_0 Connector (J11)
Pin # Signal Description
4 NC
3 SMBUS_CLK
2 GND
1
4
1 SMBUS_DATA
CPU1 DIMM3 CPU1 DIMM2 CPU1 DIMM1 CPU1 DIMM4
CPU2
CPU2 DIMM2 CPU2 DIMM3 CPU2 DIMM4 CPU2 DIMM1
CPU1
Use this connector to connect external
SMBUS devices