http://www.TYAN.com
30
2.34 – Installing the Memory
Before attempting to install any memory, make sure that the memory you have is
compatible with the motherboard as well as the processor.
The following diagram shows common types of DDR SDRAM modules:
Here are a few key points to note before installing memory into your Thunder K8SD
Pro:
•
Always install memory beginning with CPU1_DIMM1
•
In order to access memory on CPU2 DIMM1-4, Both processors must be
installed.
•
Memory in CPU2 DIMM1-4 is not required when running dual CPU
configuration.
•
AMD Opteron
TM
processors support 64bit (non-interleaved) or 128bit
(interleaved) memory configurations
•
128MB, 256MB, 512MB, 1GB, 2GB and 4GB
*
Reg/ECC PC2100
,
PC2700, and
PC3200
**
modules are supported.
•
All installed memory will be automatically detected.
•
The Thunder K8SD Pro supports up to 32GB
^
.
*
NOTE:
4GB PC3200 modules are not validated at the time of print.
**
NOTE:
With Opteron 246 C-stepping CPU and above.
^
NOTE:
Not validated at the time of release.
