59
http://www.TYAN.com
3.7 – BIOS Security Menu
The system can be configured so that all users must enter a password every time the
system boots or when BIOS Setup is entered, using either the Supervisor password or
User password. The Supervisor and User passwords activate two different levels of
password security. If you select password support, you are prompted for a one to six
character password. Type the password on the keyboard. The password does not appear
on the screen when typed. Make sure you write it down. If you forget it, you must clear
CMOS and reconfigure.
BIOS Setup Utility
Main Advanced PCI/PnP Boot
Security
Chipset Exit
Security Settings
Supervisor Password:
User Password:
Change Supervisor Password
Change User Password
Clear User Password
Boot Sector Virus Protection [Disabled]
Use [ENTER], [TAB]
or [SHIFT_TAB] to
select a field
Use [+] or [-] to
configure system time.
←
→
Select Screen
↑↓
Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
.
Feature
Option
Description
Security Settings
Not Installed
Supervisor Password:
Installed
If the password has been set,
Installed displays. If no password
is set, Not Installed displays.
Not Installed
User Password:
Installed
If the password has been set,
Installed displays. If no password
is set, Not Installed displays.
Change Supervisor
Password
Select this option to change
Supervisor Password.
Change User Password
Select this option to change User
Password.
Clear User Password
Select this option to clear User
Password.
Disabled
Boot Sector Virus Protection
Enabled
Protects the first sector of the
Hard Drive from being written.
