TYAN S2721 Скачать руководство пользователя страница 32

Страница: 32 / 44

http://www.TYAN.com

(ICH3 Chipset Configuration continued)

DMA-0 Type

[LPC DMA]

DMA-1 Type

[LPC DMA]

DMA-2 Type

[LPC DMA]

DMA-3 Type

[LPC DMA]

DMA-4 Type

[LPC DMA]

DMA-5 Type

[LPC DMA]

DMA-6 Type

[LPC DMA]

DMA-7 Type

[LPC DMA]

3.13 – Intel PCI-64 Hub 2 Chipset Configuration

Options related to the Intel PCI-64 hub and its settings can be altered through the following.

I/O Port Decode

This option allows you to adjust the decode size of the I/O ports.

RAS Sticky Error Handling

This option allows you to define how RAS errors are handled and
whether they are corrected or left as is.

IOAPIC Support in MP

Table

This option allows you to adjust settings for IOAPIC functions that
relate to multi-processor handling.

VGA Decode

Please leave this option at its default setting.

3.14 – ACPI

Options related to power management settings can be altered through the following options.

ACPI Aware O/S

Yes

Defines whether the OS can manage IRQs, DMAs, and
other system settings on its own.

ACPI Advanced

All settings discussed in following sections

3.15 – ACPI Advanced

Options related to advanced power management settings interface can be altered through the
following options.

ACPI APIC Support

This option allows you to define whether or not to enable ACPI
management features.

BIOS

AML ACPI Stable

Please leave this option at its default setting. This setting toggles
BIOS control of ACPI power features.

3.16 – Boot

Options related to boot devices can be altered through the following.

Boot Device Priority

1st Boot Device
2nd Boot Device
3rd Boot Device

Settings for boot priority. These can be
customized depending on your
preference.

Hard Disk Drives

Specifies the boot sequence for hard drive booting. This option
will show all storage devices.

Removable Devices

Specifies the boot sequence for removable drive booting. This
option will show all removable devices.

ATAPI CDROM Drives

Specifies the boot sequence for CD-ROM drive booting. This
option will show all CD-ROM devices.

Interrupt 19 Capture

This option allows removable devices to act as non-removable
devices. Some SCSI RAID cards will need this one enabled.
Please refer to your SCSI card’s manual.

Содержание S2721













































Результаты поиска

Содержание S2721

Отзывы:

Похожие инструкции для S2721

Бренды по названию

Популярные бренды

TYAN S2721, Руководство пользователя

Результаты поиска

Содержание S2721

Отзывы:

Похожие инструкции для S2721

Бренды по названию

Популярные бренды