http://www.tyan.com
36
(continued from previous page)
3.8 PC Health Status
This section describes the hardware monitoring of certain onboard devices. No options are user-defined.
3.9 Set Supervisor Password / Set User Password
Both of these functions allow for passwords to be set accordingly for BIOS configuration.
When selecting one of the password functions, the following words will appear:
ENTER PASSWORD:
After typing in a new password of up to eight characters, press
[Enter]
. The following words will then
appear:
CONFIRM PASSWORD:
Type your new password again, and the password will then be set. Please note that entering a new pass-
word and then confirming it, will clear any old password that you had (depending on type of password).
Assign IRQ for VGA
PCI/VGA Palette Snoop
Reserved. [Default setting is
Disabled
]
Sets whether an IRQ should be reserved for VGA. [Default set-
ting is
Enabled
]
Assign IRQ for USB
Sets whether an IRQ should be reserved for USB. [Default set-
ting is
Enabled
]
Current CPU2 Temp.
Current CPU1 Temp.
Displays temperature of CPU1 in Celsisus and Farenheit.
Current CPUFAN1 Speed
Displays temperature of CPU2 in Celsisus and Farenheit.
Displays speed of CPUFAN1 in revolutions per minute (RPM).
Current CPUFAN2 Speed
Displays speed of CPUFAN2 in revolutions per minute (RPM).
CPU1 Vcore
CPU2 Vcore
Displays core voltage of CPU1.
Displays core voltage of CPU2.
Displays power supply voltage on 3.3V line.
Displays power supply voltage on 12V line.
3.3V
12V
Displays power supply voltage on 5V line.
5V
