Tiger 200 S2505
35
(continued from previous page)
3.7 PnP/PCI Configuration
This section describes the PCI/PnP configuration options available.
(continued on next page)
Wake Up Events (subscreen)
Soft-Off by PWRBTN
Sets time needed to hold down the power button to shutdown
the system. [Default setting is
Instant-Off
]
VGA
Lets you enter the screen for configuring wake up events.
Sets video activity as power management event. [Default is
Off
]
LPT & COM
Sets LPT and COM/Serial Port activity as power management
events. [Default is
LPT/COM
]
HDD & FDD
PCI Master
Sets floppy and HDD activity as power management events.
[Default is
ON
]
Sets PCI activity as power management events. [Default is
Off
]
Sets Wake Up on LAN / Ring as power management events.
[Default is
Disabled
]
Sets Date and Time that system will wake up. [Default is
0
]
Wake Up on LAN / RING
Date / Time
Sets RTC Alarm as a power management event. [Default is
Dis-
abled
]
RTC Alarm Resume
Sets whether IRQ activity should be a power management
event. [Default is
ON
]
Primary INTR
In this screen, you can assign how power management will
monitor each IRQ.
IRQs Activity Monitoring
(subscreen)
Reset Configuration Data
PNP OS Installed
Sets whether the system is using a Plug-n-Play OS. [Default set-
ting is
NO
]
Resources Controlled By
(ESCD)
Sets whether the configuration data in the ESCD should be
reset at bootup. [Default setting is
Disabled
]
Sets how the PnP devices will be controlled. [Default is
Auto(ESCD)
]
IRQ Resources
Sets IRQs PnP control statuses.
DMA Resources
Sets DMAs PnP control statuses.
BIOS
