manualshive.com logo in svg

TYAN S1686D, Руководство пользователя

Поделиться
Скачать
TYAN S1686D Скачать руководство пользователя страница 41

------------------------------------------------------------------------------------------------------------------------------------------------

Pentium II Motherboards AMI BIOS Setup   -Page 

12-

Advanced Setup, 

Continued

3rd Boot Device This option sets the type of device for the third boot drives that the AMIBIOS attempts

to boot from after AMIBIOS POST completes. The settings are Disabled, CD-ROM,
Floppy, Floptical, or IDE-0. The Optimal and Fail-Safe default settings are CD-
ROM.

4th Boot Device This option sets the type of device for the fourth boot drives that the AMIBIOS attempts

to boot from after AMIBIOS POST completes. The settings are Disabled, CD-ROM,
IDE-0, Floptical, or Floppy. The Optimal and Fail-Safe default settings are Disabled.

S.M.A.R.T. For Hard Disks  Set this option to Enabled to permit AMIBIOS to use the SMART (System

Management and Reporting Technologies) protocol for reporting server system
information over a network. The settings are Enabled or Disabled. The Optimal and
Fail-Safe default settings are Disabled.

Cont’d

Содержание S1686D





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды