TYAN S1686D страница 56 Скачать руководство пользователя | Manualshive

Страница: 56 / 60

background image

------------------------------------------------------------------------------------------------------------------------------------------------

Pentium II Motherboards AMI BIOS Setup -Page

27-

PCI/PnP Setup,

Continued

determine if AMIBIOS should remove an IRQ from the pool of available IRQs passed to
devices that are configurable by the system BIOS. The available IRQ pool is determined
by reading the ESCD NVRAM. If more IRQs must be removed from the pool, the end
user can use these options to reserve the IRQ by assigning an ISA/EISA setting to it.
Onboard I/O is configured by AMIBIOS. All IRQs used by onboard I/O are configured
as PCI/PnP. IRQ12 only appears if the Mouse Support option in Advanced Setup is
set to Disabled. IRQ14 and 15 will not be available if the onboard PCI IDE is enabled.
If all IRQs are set to ISA/EISA and IRQ14 and 15 are allocated to the onboard PCI IDE,
IRQ9 will still be available for PCI and PnP devices, because at least one IRQ must be
available for PCI and PnP devices. The settings are ISA/EISA or PCI/PnP. The Optimal
and Fail-Safe default settings are PCI/PnP.

Reserved Memory Size This option specifies the size of the memory area reserved for legacy ISA

adapter cards. The settings are Disabled, 16K, 32K, or 64K. The Optimal and Fail-
Safe default settings are Disabled.

Reserved Memory Address This option specifies the beginning address (in hex) of the reserved memory

area. The specified ROM memory area is reserved for use by legacy ISA adapter cards.

This option does not appear if the Reserved Memory Size option is set to Disabled.

The settings are C0000, C4000, C8000, CC000, D0000, D4000, D8000, or DC000. The
Optimal default setting is Disabled and the Fail-Safe default setting is N/A.

«
...
54
55
56
57
58
...
»

Содержание S1686D





























































Отзывы:

Нет отзывов

Похожие инструкции для S1686D

Бренд: Yamaha Страницы: 497

Бренд: V2 ELETTRONICA Страницы: 12

B550M AORUS PRO-P

Бренд: Gigabyte Страницы: 44

Бренд: VIA Technologies Страницы: 14

Бренд: Intel Страницы: 12

Бренд: Analog Devices Страницы: 128

Бренд: JETWAY Страницы: 56

LCMXO3L-DSI-EVN

Бренд: Lattice Страницы: 2

Бренд: Aaeon Страницы: 108

Бренд: Supero Страницы: 97

Бренд: M-tech Страницы: 2

Бренд: u-blox Страницы: 23

Бренд: ASROCK Страницы: 67

Бренд: Microchip Technology Страницы: 41

Бренд: ASROCK Страницы: 181

Бренд: Samsung Страницы: 121

Бренд: CompuLab Страницы: 23

Бренд: Beckhoff Страницы: 82

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды